PAGE CONTENTS
Objectives
The project develops a drone-based validation tool for optical ground stations (OGS) that emulates the performance of laser communication terminals onboard LEO, MEO, or GEO satellites.
Key objectives of the project include:
- Realistic emulation of satellite pass trajectories at a slant range of 1 km from the OGS
- Full end-to-end validation of the OGS operational chain: ephemeris ingestion and scheduling, pointing prediction, acquisition, closed-loop tracking, link acquisition, and data transmission.
- Full support of the CCSDS 141/142 O3K standard
The tool reduces the risk and cost of OGS qualification by eliminating dependency on actual satellite passes.
Benefits
This platform offers significant advantages over current OGS validation approaches. Today, optical ground stations can only be fully validated during actual satellite passes, which are infrequent, expensive, and subject to scheduling constraints and weather windows.
This drone-based solution eliminates that dependency, enabling on-demand, repeatable, and low-cost test campaigns scheduled at the operator’s convenience which significantly reduces the risk of OGS commissioning failures and shortens the qualification timeline for new ground stations.
This tool provides realistic satellite trajectories: angular velocities, elevation profiles, and pointing uncertainty cones in a controlled fashion. The use of an industrial drone with high-precision positioning ensures the required accuracy at 1 km link distance, making the emulated pass physically representative.
The system supports multiple orbit classes (LEO, MEO, GEO) and the full CCSDS O3K protocol stack, covering the complete operational chain from scheduling through actual data transmission.
Features
The system comprises an industrial drone carrying a custom-developed laser communication terminal (LCT) with dynamic tracking capability. The LCT is mounted on a gimbal with encoders achieving better than 5 mrad blind-pointing accuracy.
A ground-based software suite handles ephemeris ingestion, trajectory computation, and conversion to drone waypoints. A dedicated Human Drone Interface (HDI) provides real-time monitoring, flight control, LCT parameter adjustment, and telemetry display.
Built-in safety systems include autonomous return-to-home, hover-and-wait, emergency landing, obstacle avoidance, and redundant control options. The platform is designed to operate in temperatures from −10 to 40 °C, winds up to 40 km/h (gusts 50 km/h), humidity up to 95%, and in the presence of dust and atmospheric turbulence.
Challenges
The primary challenges of the project are
- Maintaining the drone take-off weight below 25 kg to conform with the EU Open drone category to minimize operational constraints arising from aviation authority approval
- Achieving high positioning accuracy of the drone
- Ensuring robustness at environmental conditions at 1 km altitude above the OGS
System Architecture
The system consists of the drone-borne platform, an LCT, and a software suite for link scheduling and trajectory planning.
The drone-borne platform provides the airframe and a two-axis gimbal on which the LCT payload is mounted. The LCT integrates the optical transmitter, receiver, and a SoC-based modem.
The software suite features a trajectory engine converting satellite orbital information into time-tagged drone waypoints as well as a user interface providing visualization, parameter control, and event logging.
Plan
The project starts with a requirement analysis and system design phase in which the baseline design is established. Key sub-systems such as the drone and the LCT will be tested early in the project to ensure representative satellite passes can be emulated. After successful factory acceptance testing the OGS validation tool is tested on-site at the IZN-1 ground station in Tenerife.
Current Status
Currently, the requirements are defined and the baseline design is established.
Companies